To run SBO Solution from USB drive you will need to set the boot options in your computer BIOS. You can access BIOS setup at the time of booting of the computer by pressing F1 or F11. Other keys, may also be used which will be displayed in the option. From boot option set USB. Then save the BIOS settings and restart the computer. Now it should automatically boot from your selected option USB.When you start to run SBO Solution from USB, it will display the following screens.

 

After booting, the first step to run SBO Solution is the prompt for keyboard layout. By default USA layout is selected which is perfect for our purpose. Please press ENTER key.

Now it will prompt for the preferred time zone. Please select your preferred time zone. You can browse time zones by pressing UP and DOWN arrow in the keyboard. Once selected, please press ENTER key.

Now it will prompt to select hardware clock type. It should be same as the time zone; by pressing local, we can ensure that. By default Local is selected. Please press ENTER Key to continue.

On this prompt, by default, Probe is selected which will locate the preferred Video Driver. Please press ENTER key to select probe.

This prompt will only appear if the OS cannot determine the monitor type automatically. Press DOWN arroa and UP arrow to select your monitor type, or you can just press ENTER key.

This prompt will only appear if the OS cannot determine the monitor type automatically. Press DOWN arrow and UP arrow to select your monitor type, or you can just press ENTER key.

After the previous step, operating system will complete booting and it will show a license agreement of Team Viewer. This is a required software pre installed in the distribution. Please accept the license agreement by clicking on it or by selecting the button.

After accepting license agreement, the SBO is ready for setting internet connections. Thus you have successfully run SBO Solution from USB.